|
Starting with issue #21
Airbrush Technique Magazine will be available as a digital magazine also.
CLICK
HERE for more details. |
FREE issue of Airbrush Technique Magazine
issue #12 in digital format click on the magazine above. |
Get your technique together today!! Subscribe to our
magazine; it will prove to be the best tool you have in your artist arsenal of
tools. Click on the cover above for details about
Airbrush Technique
Magazine. |
 |
|
How To Airbrush #1 the
DVD, 45 minute airbrush instructional DVD covering basic airbrush lessons,
airbrush equipment basics, airbrush cleaning and maintenance. $39.95 US only
sorry, FREE shipping US mail. Click on the picture above to order.
|
Get your technique together today!! Subscribe to
our magazine; it will prove to be the best tool you have in your artist arsenal
of tools. Click on the cover above for details about Airbrush Technique
Magazine. |
|
|
Airbrush Trouble Shooting
"Airbrush main lever replacement."
by Don Johnson
airbrush artist
and
publisher / editor of
Airbrush Technique Magazine
and Airbrush Artist
Magazine.
Brought to you by Airhead Airbrush .Com ,
Inc. and Airbrush Artist
Magazine .Com and Airbrush Technique
Magazine. Your best resources for learning " How To " Airbrush, custom
paint. Subscribe today to the best Airbrush, Custom painting magazines on the
planet. Click on the magazine banners below for detailed information about the
magazines and or to subscribe. |
Move beyond the basics
100's of
airbrush, custom painting tutorials and lessons
Members only support forum
for live help
Airbrush Technique/Airbrush Artist Magazine
CLICK HERE FOR MORE
INFORMATION |
|
As picture above shows when installing
the trigger back into your airbrush (Iwata) hold the trigger (main lever) so
that the two posts at the bottom of the trigger (main lever) face the front and
back of the airbrush.
Insert the trigger (main lever) down into the
long opening in the top of your airbrush. Now turn the trigger (main lever) 90
degrees so the posts at the bottom of the trigger (main lever) are now facing
the sides of the airbrush. Lower the trigger inserting the posts into the slot
inside your airbrush (marked X ). The slot in the bottom of the trigger (marked
Y) the needle will pass thru will now be facing the front to back of the
airbrush. |
 |
|
With this done now tilt the front of the
airbrush slightly down ward install the auxiliary lever so that the arch in
that lever faces the back of the airbrush see picture #2. To insert the
auxiliary lever you must also turn this side ways (as as you did the trigger)
to get it down into the airbrush than turn it 90 degree's so it ends up as
pictured in #2.
There you have it the main level or trigger is back in
your airbrush. Before you set the airbrush down please install the needle as
it's the only thing that holds the main lever or trigger in the airbrush. Once
the main lever or trigger and needle are in place test the main lever, trigger
by gently pushing down on it, it should spring back up if installed correctly.
|
| Copyrights :Airhead Airbrush.Com , Inc. Reserved No part of
this tutorial may be reproduced, stored in a retrieval system or transmitted in
any form or by any means, electronic, electrostatic, magnetic tape, mechanical
or otherwise, without prior permission in writing from Airhead Airbrush. Com ,
Inc. and or the Contributing Artist |
Discuss this tutorial in our
forums
|
