|
AIRBRUSH REPAIR
By Don Johnson
Airhead
Airbrush.Com, Inc
www.airbrushartistmagazine.com
www.airbrushtechniquemagazine.com
|
As picture below shows when installing
the trigger back into your airbrush (Iwata) hold the trigger (main lever) so
that the two posts at the bottom of the trigger (main lever) face the front and
back of the airbrush. Insert the trigger (main lever) down into the long
opening in the top of your airbrush. Now turn the trigger (main lever) 90
degrees so the posts at the bottom of the trigger (main lever) are now facing
the sides of the airbrush. Lower the trigger inserting the posts into the slot
inside your airbrush. With this done now tilt the front of the airbrush
slightly down ward install the auxiliary lever so that the arch in that lever
faces the back of the airbrush see picture #2. To insert the auxiliary lever
you must also turn this side ways to get it down into the airbrush than turn it
90 degree's so it ends up as pictured in #2. |
Picture 1
below
Picture 2 below
| Copyrights :Airhead Airbrush.Com , Inc. Reserved No part of
this tutorial may be reproduced, stored in a retrieval system or transmitted in
any form or by any means, electronic, electrostatic, magnetic tape, mechanical
or otherwise, without prior permission in writing from Airhead Airbrush. Com ,
Inc. |
 |
I hope you found
this article helpful.
Two more great resources to learn more about
airbrushing, kustom painting are my airbrush, kustom painting magazines. Check
them out via the links below. Until next time "It's just paint" have
fun.
Airbrush
Technique Magazine
Airbrush Artist Magazine
|
|
FREE preview of Airbrush Technique
Magazine issue #12 in digital format click on the magazine
above.
|
 |
|
How To Airbrush #1 the DVD, 45
minute airbrush instructional DVD covering basic airbrush lessons, airbrush
equipment basics, airbrush cleaning and maintenance. $39.95 US only sorry, FREE
shipping US mail. Click on the picture above to order.
|
|
